hasslesstech/ak-kr-project
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Compare commits

base: hasslesstech:5785093138ceb9359ff2907e8389db5cb6478382
Branches Tags
hasslesstech:master hasslesstech:dev hasslesstech:KSZ8081RND hasslesstech:if-rework-4 hasslesstech:if-rework-3 hasslesstech:if-rework-2 hasslesstech:if-rework-1 hasslesstech:dht11-v2 hasslesstech:dht11
..
compare: hasslesstech:dht11
Branches Tags
hasslesstech:dev hasslesstech:master hasslesstech:KSZ8081RND hasslesstech:if-rework-4 hasslesstech:if-rework-3 hasslesstech:if-rework-2 hasslesstech:if-rework-1 hasslesstech:dht11-v2 hasslesstech:dht11

2 Commits
5785093138 ... dht11

Author SHA1 Message Date
hasslesstech
28b840f1a4 recover GPIOD 11 state after changing it 2025-02-20 01:07:55 +02:00
hasslesstech
5b4d65d45c add untested driver prototype for DHT11 humidity and temperature sensor 2025-02-20 01:02:11 +02:00
21 changed files with 200 additions and 10953 deletions
Expand all files Collapse all files

1
.gitignore vendored
View File

@@ -1 +0,0 @@
Debug/*

4
.mxproject
View File

File diff suppressed because one or more lines are too long

2
Core/Inc/PCA9685.h
View File

@@ -1,2 +0,0 @@
void PCA9685_run_test(void);
void PCA9685_cleanup(void);

30
Core/Inc/dht11.h Normal file
View File

@@ -0,0 +1,30 @@
#ifndef __DHT11
#define __DHT11
#define SKIP_LOW while (!(GPIOD->IDR & 0x0800)) {}
#define SKIP_HIGH while (GPIOD->IDR & 0x0800) {}
#define FILL_REGISTER do { \
for (int i = 0; i < 8; i++) { \
read_register <<= 1; \
SKIP_LOW; \
read_register |= dht11_measure_high_duration(); \
} } while (0)
struct SysTickConfig {
uint32_t ctrl;
uint32_t load;
uint32_t val;
};
struct DHT11_Data {
uint8_t humid_integral;
uint8_t humid_decimal;
uint8_t temp_integral;
uint8_t temp_decimal;
uint8_t crc;
};
void dht11_show_both(void);
#endif

2
Core/Inc/lcd.h
View File

@@ -1,8 +1,6 @@
#ifndef __LCD #ifndef __LCD
#define __LCD #define __LCD
#include <stdint.h>
#define DISPLAY_RS ((uint16_t) (0x1U << 7)) #define DISPLAY_RS ((uint16_t) (0x1U << 7))
#define DISPLAY_RW ((uint16_t) (0x1U << 10)) #define DISPLAY_RW ((uint16_t) (0x1U << 10))
#define DISPLAY_ENA ((uint16_t) (0x1U << 11)) #define DISPLAY_ENA ((uint16_t) (0x1U << 11))

2
Core/Inc/stm32f4xx_hal_conf.h
View File

@@ -53,7 +53,7 @@
/* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */
/* #define HAL_SDRAM_MODULE_ENABLED */ /* #define HAL_SDRAM_MODULE_ENABLED */
/* #define HAL_HASH_MODULE_ENABLED */ /* #define HAL_HASH_MODULE_ENABLED */
#define HAL_I2C_MODULE_ENABLED /* #define HAL_I2C_MODULE_ENABLED */
/* #define HAL_I2S_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */
/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_IWDG_MODULE_ENABLED */
/* #define HAL_LTDC_MODULE_ENABLED */ /* #define HAL_LTDC_MODULE_ENABLED */

4
Core/Inc/stm32f4xx_it.h
View File

@@ -55,10 +55,8 @@ void SVC_Handler(void);
void DebugMon_Handler(void); void DebugMon_Handler(void);
void PendSV_Handler(void); void PendSV_Handler(void);
void SysTick_Handler(void); void SysTick_Handler(void);
/* USER CODE BEGIN EFP */
void EXTI0_IRQHandler(void); void EXTI0_IRQHandler(void);
void EXTI9_5_IRQHandler(void); /* USER CODE BEGIN EFP */
/* USER CODE END EFP */ /* USER CODE END EFP */

78
Core/Src/PCA9685.c
View File

@@ -1,78 +0,0 @@
#include "main.h"
#include "PCA9685.h"
#include "lcd.h"
extern I2C_HandleTypeDef hi2c1;
void PCA9685_run_test(void)
{
DISPLAY_CLEAR;
display_write_data_seq("PCA9685 PWM");
HAL_GPIO_WritePin(GPIOB, GPIO_PIN_7, GPIO_PIN_RESET);
HAL_StatusTypeDef op_result;
size_t err_count = 0;
uint8_t tx_data[10] = {
0x00, 0x01,
0x06, 0x00,
0x07, 0x00,
0x08, 0xFF,
0x09, 0x0C,
};
for (size_t i = 0; i < 10; i += 2) {
for (size_t t = 0; t < 5; t++) {
op_result = HAL_I2C_Master_Transmit(&hi2c1, 0x80, &(tx_data[i]), 2, 2000);
if (op_result) {
err_count++;
DISPLAY_CLEAR;
display_write_data_seq("PCA9685 PWM");
DISPLAY_SET_CURSOR(1, 0);
display_write_data_seq("B");
display_write_data_byte('0' + i);
display_write_data_byte(':');
display_write_data_byte('1' + t);
display_write_data_seq("/5 ");
switch (op_result) {
case HAL_ERROR:
display_write_data_seq("ERROR");
break;
case HAL_BUSY:
display_write_data_seq("BUSY");
break;
case HAL_TIMEOUT:
display_write_data_seq("TIMEOUT");
break;
}
HAL_Delay(2000);
} else {
break;
}
}
}
DISPLAY_CLEAR;
display_write_data_seq("PCA9685 PWM");
if (err_count) {
DISPLAY_SET_CURSOR(1, 0);
display_write_data_byte('0' + err_count / 10 % 10);
display_write_data_byte('0' + err_count % 10);
display_write_data_seq(" errors");
} else {
DISPLAY_SET_CURSOR(1, 1);
display_write_data_seq("OK");
}
}
void PCA9685_cleanup(void)
{
HAL_GPIO_WritePin(GPIOB, GPIO_PIN_7, GPIO_PIN_SET);
}

101
Core/Src/dht11.c Normal file
View File

@@ -0,0 +1,101 @@
#include "main.h"
#include "generic_macros.h"
#include "dht11.h"
static struct SysTickConfig stc;
static uint32_t *systick_base = (uint32_t *) SysTick_BASE;
static void wait(uint32_t wait_us)
{
int target_time = *(systick_base+8);
target_time -= wait_us << 4;
while (*(systick_base+8) > target_time) {}
}
static void dht11_save_systick_state(void)
{
stc.ctrl = *(systick_base + 0);
stc.load = *(systick_base + 4);
stc.val = *(systick_base + 8);
}
static void dht11_load_systick_state(void)
{
*(systick_base + 4) = stc.load;
*(systick_base + 8) = stc.val;
*(systick_base + 0) = stc.ctrl;
}
static void dht11_init_systick(void)
{
dht11_save_systick_state();
*(systick_base + 0) = 0x5; // disable /8 prescaler, no interrupts, enable counting
*(systick_base + 4) = 0xFFFFFF; // load largest possible value
// verify value load
if (*(systick_base + 8) == 0)
PANIC(0x4000);
}
static size_t dht11_measure_high_duration(void)
{
int current_time = *(systick_base+8);
SKIP_HIGH;
// elapsed_time > 49us ? 1 : 0
return (current_time - *(systick_base+8)) > (49 << 4);
}
static void dht11_read_value(struct DHT11_Data *data)
{
dht11_init_systick();
register uint8_t read_register = 0;
GPIOD->BSRR = GPIO_PIN_11; // enable DHT11
wait(50000); // hold HIGH for 50 ms
GPIOD->BSRR = GPIO_PIN_11 << 16; // start signal
wait(30000); // hold it for 30 ms
GPIOD->BSRR = GPIO_PIN_11; // pull up, DHT will now take control over the connection
// switch GPIOD 11 to input mode
GPIOD->MODER &= 0xFF3FFFFF;
// read transmission start sequence from DHT11
SKIP_HIGH;
SKIP_LOW;
SKIP_HIGH;
// read humidity integral
FILL_REGISTER;
data->humid_integral = read_register;
// read humidity decimal
FILL_REGISTER;
data->humid_decimal = read_register;
// read temperature integral
FILL_REGISTER;
data->temp_integral = read_register;
// read temperature decimal
FILL_REGISTER;
data->temp_decimal = read_register;
// read crc
FILL_REGISTER;
data->crc = read_register;
// switch GPIOD 11 back to output mode
GPIOD->MODER |= 0x00900000;
dht11_load_systick_state();
}
void dht11_show_both(void)
{
struct DHT11_Data data;
dht11_read_value(&data);
}

250
Core/Src/main.c
View File

@@ -25,7 +25,7 @@
#include "generic_macros.h" #include "generic_macros.h"
#include "lcd.h" #include "lcd.h"
#include "external_temp.h" #include "external_temp.h"
#include "PCA9685.h" #include "dht11.h"
/* USER CODE END Includes */ /* USER CODE END Includes */
@@ -37,9 +37,6 @@
/* Private define ------------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */ /* USER CODE BEGIN PD */
#define WAIT_UNTIL_CB_PRESSED while (!HAL_GPIO_ReadPin(GPIOA, GPIO_PIN_0) && HAL_GPIO_ReadPin(GPIOC, GPIO_PIN_8))
#define WAIT_UNTIL_CB_RELEASED while (HAL_GPIO_ReadPin(GPIOA, GPIO_PIN_0) || !HAL_GPIO_ReadPin(GPIOC, GPIO_PIN_8))
/* USER CODE END PD */ /* USER CODE END PD */
/* Private macro -------------------------------------------------------------*/ /* Private macro -------------------------------------------------------------*/
@@ -50,27 +47,15 @@
/* Private variables ---------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/
ADC_HandleTypeDef hadc1; ADC_HandleTypeDef hadc1;
I2C_HandleTypeDef hi2c1;
/* USER CODE BEGIN PV */ /* USER CODE BEGIN PV */
void ((*executors[])(void)) = { void ((*executors[])(void)) = {
dht11_show_both,
external_temp_show_celsius, external_temp_show_celsius,
external_temp_show_fahrenheit, external_temp_show_fahrenheit
PCA9685_run_test
}; };
void ((*cleanup_functions[])(void)) = { int current_executor_id = 0;
NULL,
NULL,
PCA9685_cleanup
};
int delay_between_runs[] = {250, 250, -1};
size_t current_executor_id = 0;
size_t buttons_interrupt_enabled;
/* USER CODE END PV */ /* USER CODE END PV */
@@ -78,7 +63,6 @@ size_t buttons_interrupt_enabled;
void SystemClock_Config(void); void SystemClock_Config(void);
static void MX_GPIO_Init(void); static void MX_GPIO_Init(void);
static void MX_ADC1_Init(void); static void MX_ADC1_Init(void);
static void MX_I2C1_Init(void);
/* USER CODE BEGIN PFP */ /* USER CODE BEGIN PFP */
/* USER CODE END PFP */ /* USER CODE END PFP */
@@ -86,132 +70,6 @@ static void MX_I2C1_Init(void);
/* Private user code ---------------------------------------------------------*/ /* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */ /* USER CODE BEGIN 0 */
void buttons_switch_to_interrupt(void)
{
// save current executor ID
size_t tmp = current_executor_id;
// configure user button
GPIO_InitTypeDef GPIO_InitStruct = {0};
GPIO_InitStruct.Pin = GPIO_PIN_0;
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
HAL_NVIC_SetPriority(EXTI0_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(EXTI0_IRQn);
// configure SW5 (alternative advancing method)
GPIO_InitStruct.Pin = GPIO_PIN_8;
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
HAL_NVIC_SetPriority(EXTI9_5_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(EXTI9_5_IRQn);
// restore current executor ID
current_executor_id = tmp;
// set interrupt mode flag
buttons_interrupt_enabled = 1;
}
void buttons_switch_to_input(void)
{
// configure user button
GPIO_InitTypeDef GPIO_InitStruct = {0};
GPIO_InitStruct.Pin = GPIO_PIN_0;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
HAL_NVIC_DisableIRQ(EXTI0_IRQn);
// configure SW5 (alternative input method)
GPIO_InitStruct.Pin = GPIO_PIN_8;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
HAL_NVIC_DisableIRQ(EXTI9_5_IRQn);
// clear interrupt mode flag
buttons_interrupt_enabled = 0;
}
void button_init_and_test(void)
{
// letting the buttons be tested
display_write_data_seq("Fill any bar:");
DISPLAY_SET_CURSOR(1, 5);
display_write_data_seq("[-] [-----]");
size_t pressed_elements;
uint32_t sw_button_locations[5][2] = {
{GPIOC, GPIO_PIN_11},
{GPIOA, GPIO_PIN_15},
{GPIOC, GPIO_PIN_9},
{GPIOC, GPIO_PIN_6},
{GPIOC, GPIO_PIN_8}
};
do {
HAL_Delay(100);
pressed_elements = 0;
DISPLAY_SET_CURSOR(1, 6);
if (HAL_GPIO_ReadPin(GPIOA, GPIO_PIN_0)) {
pressed_elements |= 0x20;
display_write_data_byte('*');
} else {
display_write_data_byte('-');
}
DISPLAY_SET_CURSOR(1, 10);
for (size_t i = 0; i < 5; i++) {
pressed_elements >>= 1;
size_t input = !HAL_GPIO_ReadPin(sw_button_locations[i][0], sw_button_locations[i][1]);
if (input) {
pressed_elements |= 0x20;
display_write_data_byte('*');
} else {
display_write_data_byte('-');
}
}
} while (!(((pressed_elements & 0x1) == 0x1) || ((pressed_elements & 0x3E) == 0x3E)));
// visual reaction to bar fill
DISPLAY_SET_CURSOR(0, 0);
display_write_data_seq("Release buttons");
GPIOD->ODR = 0x1000;
HAL_Delay(500);
GPIOD->ODR = 0x2000;
HAL_Delay(500);
GPIOD->ODR = 0x4000;
HAL_Delay(500);
GPIOD->ODR = 0x8000;
HAL_Delay(500);
// waiting for control buttons to be released
WAIT_UNTIL_CB_RELEASED;
GPIOD->ODR = 0x0000;
HAL_Delay(200);
}
void switch_to_next_test(void)
{
current_executor_id += 1;
current_executor_id %= 3;
}
/* USER CODE END 0 */ /* USER CODE END 0 */
/** /**
@@ -244,15 +102,12 @@ int main(void)
/* Initialize all configured peripherals */ /* Initialize all configured peripherals */
MX_GPIO_Init(); MX_GPIO_Init();
MX_ADC1_Init(); MX_ADC1_Init();
MX_I2C1_Init();
/* USER CODE BEGIN 2 */ /* USER CODE BEGIN 2 */
buttons_interrupt_enabled = 0;
GPIOD->ODR = 0x1000;
display_init();
GPIOD->ODR = 0xF000; GPIOD->ODR = 0xF000;
button_init_and_test(); display_init();
HAL_Delay(1000);
GPIOD->ODR = 0x0000;
/* USER CODE END 2 */ /* USER CODE END 2 */
@@ -260,29 +115,8 @@ int main(void)
/* USER CODE BEGIN WHILE */ /* USER CODE BEGIN WHILE */
while (1) while (1)
{ {
if (delay_between_runs[current_executor_id] == -1 && buttons_interrupt_enabled)
buttons_switch_to_input();
else if (delay_between_runs[current_executor_id] != -1 && !buttons_interrupt_enabled)
buttons_switch_to_interrupt();
executors[current_executor_id](); executors[current_executor_id]();
HAL_Delay(250);
if (delay_between_runs[current_executor_id] == -1) {
WAIT_UNTIL_CB_PRESSED;
HAL_Delay(150);
GPIOD->ODR = 0x1000;
WAIT_UNTIL_CB_RELEASED;
HAL_Delay(150);
GPIOD->ODR = 0x0000;
if (cleanup_functions[current_executor_id])
cleanup_functions[current_executor_id]();
switch_to_next_test();
} else {
HAL_Delay(delay_between_runs[current_executor_id]);
}
/* USER CODE END WHILE */ /* USER CODE END WHILE */
/* USER CODE BEGIN 3 */ /* USER CODE BEGIN 3 */
@@ -383,40 +217,6 @@ static void MX_ADC1_Init(void)
} }
/**
* @brief I2C1 Initialization Function
* @param None
* @retval None
*/
static void MX_I2C1_Init(void)
{
/* USER CODE BEGIN I2C1_Init 0 */
/* USER CODE END I2C1_Init 0 */
/* USER CODE BEGIN I2C1_Init 1 */
/* USER CODE END I2C1_Init 1 */
hi2c1.Instance = I2C1;
hi2c1.Init.ClockSpeed = 100000;
hi2c1.Init.DutyCycle = I2C_DUTYCYCLE_2;
hi2c1.Init.OwnAddress1 = 0;
hi2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
hi2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
hi2c1.Init.OwnAddress2 = 0;
hi2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
hi2c1.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
if (HAL_I2C_Init(&hi2c1) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN I2C1_Init 2 */
/* USER CODE END I2C1_Init 2 */
}
/** /**
* @brief GPIO Initialization Function * @brief GPIO Initialization Function
* @param None * @param None
@@ -433,21 +233,18 @@ static void MX_GPIO_Init(void)
__HAL_RCC_GPIOB_CLK_ENABLE(); __HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOE_CLK_ENABLE(); __HAL_RCC_GPIOE_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE(); __HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
/*Configure GPIO pin Output Level */ /*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOE, GPIO_PIN_7|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12 HAL_GPIO_WritePin(GPIOE, GPIO_PIN_7|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12
|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15, GPIO_PIN_RESET); |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15, GPIO_PIN_RESET);
/*Configure GPIO pin Output Level */ /*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOD, GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15, GPIO_PIN_RESET); HAL_GPIO_WritePin(GPIOD, GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
|GPIO_PIN_15, GPIO_PIN_RESET);
/*Configure GPIO pin Output Level */ /*Configure GPIO pin : PA0 */
HAL_GPIO_WritePin(GPIOB, GPIO_PIN_7, GPIO_PIN_RESET); GPIO_InitStruct.Pin = GPIO_PIN_0;
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
/*Configure GPIO pins : PA0 PA15 */
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_15;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL; GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -460,25 +257,18 @@ static void MX_GPIO_Init(void)
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct); HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/*Configure GPIO pins : PD12 PD13 PD14 PD15 */ /*Configure GPIO pins : PD11 PD12 PD13 PD14
GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15; PD15 */
GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
|GPIO_PIN_15;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL; GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/*Configure GPIO pins : PC6 PC8 PC9 PC11 */ /* EXTI interrupt init*/
GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_11; HAL_NVIC_SetPriority(EXTI0_IRQn, 0, 0);
GPIO_InitStruct.Mode = GPIO_MODE_INPUT; HAL_NVIC_EnableIRQ(EXTI0_IRQn);
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/*Configure GPIO pin : PB7 */
GPIO_InitStruct.Pin = GPIO_PIN_7;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* USER CODE BEGIN MX_GPIO_Init_2 */ /* USER CODE BEGIN MX_GPIO_Init_2 */
/* USER CODE END MX_GPIO_Init_2 */ /* USER CODE END MX_GPIO_Init_2 */

68
Core/Src/stm32f4xx_hal_msp.c
View File

@@ -140,74 +140,6 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
} }
/**
* @brief I2C MSP Initialization
* This function configures the hardware resources used in this example
* @param hi2c: I2C handle pointer
* @retval None
*/
void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hi2c->Instance==I2C1)
{
/* USER CODE BEGIN I2C1_MspInit 0 */
/* USER CODE END I2C1_MspInit 0 */
__HAL_RCC_GPIOB_CLK_ENABLE();
/**I2C1 GPIO Configuration
PB6 ------> I2C1_SCL
PB9 ------> I2C1_SDA
*/
GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_9;
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF4_I2C1;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* Peripheral clock enable */
__HAL_RCC_I2C1_CLK_ENABLE();
/* USER CODE BEGIN I2C1_MspInit 1 */
/* USER CODE END I2C1_MspInit 1 */
}
}
/**
* @brief I2C MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hi2c: I2C handle pointer
* @retval None
*/
void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
{
if(hi2c->Instance==I2C1)
{
/* USER CODE BEGIN I2C1_MspDeInit 0 */
/* USER CODE END I2C1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_I2C1_CLK_DISABLE();
/**I2C1 GPIO Configuration
PB6 ------> I2C1_SCL
PB9 ------> I2C1_SDA
*/
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6);
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_9);
/* USER CODE BEGIN I2C1_MspDeInit 1 */
/* USER CODE END I2C1_MspDeInit 1 */
}
}
/* USER CODE BEGIN 1 */ /* USER CODE BEGIN 1 */
/* USER CODE END 1 */ /* USER CODE END 1 */

35
Core/Src/stm32f4xx_it.c
View File

@@ -41,12 +41,14 @@
/* Private variables ---------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV */ /* USER CODE BEGIN PV */
extern size_t current_executor_id; extern void ((*executors[])(void));
extern void *current_executor(void);
extern int current_executor_id;
/* USER CODE END PV */ /* USER CODE END PV */
/* Private function prototypes -----------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/
/* USER CODE BEGIN PFP */ /* USER CODE BEGIN PFP */
void switch_to_next_test(void);
/* USER CODE END PFP */ /* USER CODE END PFP */
/* Private user code ---------------------------------------------------------*/ /* Private user code ---------------------------------------------------------*/
@@ -198,32 +200,29 @@ void SysTick_Handler(void)
/* please refer to the startup file (startup_stm32f4xx.s). */ /* please refer to the startup file (startup_stm32f4xx.s). */
/******************************************************************************/ /******************************************************************************/
/* USER CODE BEGIN 1 */ /**
* @brief This function handles EXTI line0 interrupt.
*/
void EXTI0_IRQHandler(void) void EXTI0_IRQHandler(void)
{ {
/* USER CODE BEGIN EXTI0_IRQn 0 */
GPIOD->ODR = 0x1000; GPIOD->ODR = 0x1000;
switch_to_next_test(); current_executor_id += 1;
current_executor_id &= 1;
for (int i = 300000; i > 0; i--) asm("nop"); for (int i = 900000; i > 0; i--) asm("nop");
GPIOD->ODR = 0x0000; GPIOD->ODR = 0x0000;
/* USER CODE END EXTI0_IRQn 0 */
HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_0); HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_0);
/* USER CODE BEGIN EXTI0_IRQn 1 */
/* USER CODE END EXTI0_IRQn 1 */
} }
void EXTI9_5_IRQHandler(void) /* USER CODE BEGIN 1 */
{
GPIOD->ODR = 0x1000;
switch_to_next_test();
for (int i = 300000; i > 0; i--) asm("nop");
GPIOD->ODR = 0x0000;
HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_8);
}
/* USER CODE END 1 */ /* USER CODE END 1 */

11
Debug/Core/Src/subdir.mk
View File

@@ -5,7 +5,8 @@
# Add inputs and outputs from these tool invocations to the build variables # Add inputs and outputs from these tool invocations to the build variables
C_SRCS += \ C_SRCS += \
../Core/Src/PCA9685.c \ ../Core/Src/dht11.c \
../Core/Src/external-temperature.c \
../Core/Src/external_temp.c \ ../Core/Src/external_temp.c \
../Core/Src/lcd.c \ ../Core/Src/lcd.c \
../Core/Src/main.c \ ../Core/Src/main.c \
@@ -16,7 +17,8 @@ C_SRCS += \
../Core/Src/system_stm32f4xx.c ../Core/Src/system_stm32f4xx.c
OBJS += \ OBJS += \
./Core/Src/PCA9685.o \ ./Core/Src/dht11.o \
./Core/Src/external-temperature.o \
./Core/Src/external_temp.o \ ./Core/Src/external_temp.o \
./Core/Src/lcd.o \ ./Core/Src/lcd.o \
./Core/Src/main.o \ ./Core/Src/main.o \
@@ -27,7 +29,8 @@ OBJS += \
./Core/Src/system_stm32f4xx.o ./Core/Src/system_stm32f4xx.o
C_DEPS += \ C_DEPS += \
./Core/Src/PCA9685.d \ ./Core/Src/dht11.d \
./Core/Src/external-temperature.d \
./Core/Src/external_temp.d \ ./Core/Src/external_temp.d \
./Core/Src/lcd.d \ ./Core/Src/lcd.d \
./Core/Src/main.d \ ./Core/Src/main.d \
@@ -45,7 +48,7 @@ Core/Src/%.o Core/Src/%.su Core/Src/%.cyclo: ../Core/Src/%.c Core/Src/subdir.mk
clean: clean-Core-2f-Src clean: clean-Core-2f-Src
clean-Core-2f-Src: clean-Core-2f-Src:
-$(RM) ./Core/Src/PCA9685.cyclo ./Core/Src/PCA9685.d ./Core/Src/PCA9685.o ./Core/Src/PCA9685.su ./Core/Src/external_temp.cyclo ./Core/Src/external_temp.d ./Core/Src/external_temp.o ./Core/Src/external_temp.su ./Core/Src/lcd.cyclo ./Core/Src/lcd.d ./Core/Src/lcd.o ./Core/Src/lcd.su ./Core/Src/main.cyclo ./Core/Src/main.d ./Core/Src/main.o ./Core/Src/main.su ./Core/Src/stm32f4xx_hal_msp.cyclo ./Core/Src/stm32f4xx_hal_msp.d ./Core/Src/stm32f4xx_hal_msp.o ./Core/Src/stm32f4xx_hal_msp.su ./Core/Src/stm32f4xx_it.cyclo ./Core/Src/stm32f4xx_it.d ./Core/Src/stm32f4xx_it.o ./Core/Src/stm32f4xx_it.su ./Core/Src/syscalls.cyclo ./Core/Src/syscalls.d ./Core/Src/syscalls.o ./Core/Src/syscalls.su ./Core/Src/sysmem.cyclo ./Core/Src/sysmem.d ./Core/Src/sysmem.o ./Core/Src/sysmem.su ./Core/Src/system_stm32f4xx.cyclo ./Core/Src/system_stm32f4xx.d ./Core/Src/system_stm32f4xx.o ./Core/Src/system_stm32f4xx.su -$(RM) ./Core/Src/dht11.cyclo ./Core/Src/dht11.d ./Core/Src/dht11.o ./Core/Src/dht11.su ./Core/Src/external-temperature.cyclo ./Core/Src/external-temperature.d ./Core/Src/external-temperature.o ./Core/Src/external-temperature.su ./Core/Src/external_temp.cyclo ./Core/Src/external_temp.d ./Core/Src/external_temp.o ./Core/Src/external_temp.su ./Core/Src/lcd.cyclo ./Core/Src/lcd.d ./Core/Src/lcd.o ./Core/Src/lcd.su ./Core/Src/main.cyclo ./Core/Src/main.d ./Core/Src/main.o ./Core/Src/main.su ./Core/Src/stm32f4xx_hal_msp.cyclo ./Core/Src/stm32f4xx_hal_msp.d ./Core/Src/stm32f4xx_hal_msp.o ./Core/Src/stm32f4xx_hal_msp.su ./Core/Src/stm32f4xx_it.cyclo ./Core/Src/stm32f4xx_it.d ./Core/Src/stm32f4xx_it.o ./Core/Src/stm32f4xx_it.su ./Core/Src/syscalls.cyclo ./Core/Src/syscalls.d ./Core/Src/syscalls.o ./Core/Src/syscalls.su ./Core/Src/sysmem.cyclo ./Core/Src/sysmem.d ./Core/Src/sysmem.o ./Core/Src/sysmem.su ./Core/Src/system_stm32f4xx.cyclo ./Core/Src/system_stm32f4xx.d ./Core/Src/system_stm32f4xx.o ./Core/Src/system_stm32f4xx.su
.PHONY: clean-Core-2f-Src .PHONY: clean-Core-2f-Src

8
Debug/Drivers/STM32F4xx_HAL_Driver/Src/subdir.mk
View File

@@ -16,8 +16,6 @@ C_SRCS += \
../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c \ ../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c \
../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c \ ../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c \
../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c \ ../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c \
../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c \
../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c \
../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c \ ../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c \
../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c \ ../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c \
../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c \ ../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c \
@@ -38,8 +36,6 @@ OBJS += \
./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.o \ ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.o \
./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.o \ ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.o \
./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.o \ ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.o \
./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.o \
./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.o \
./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.o \ ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.o \
./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.o \ ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.o \
./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.o \ ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.o \
@@ -60,8 +56,6 @@ C_DEPS += \
./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.d \ ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.d \
./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.d \ ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.d \
./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.d \ ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.d \
./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.d \
./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.d \
./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.d \ ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.d \
./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.d \ ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.d \
./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.d \ ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.d \
@@ -78,7 +72,7 @@ Drivers/STM32F4xx_HAL_Driver/Src/%.o Drivers/STM32F4xx_HAL_Driver/Src/%.su Drive
clean: clean-Drivers-2f-STM32F4xx_HAL_Driver-2f-Src clean: clean-Drivers-2f-STM32F4xx_HAL_Driver-2f-Src
clean-Drivers-2f-STM32F4xx_HAL_Driver-2f-Src: clean-Drivers-2f-STM32F4xx_HAL_Driver-2f-Src:
-$(RM) ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_adc.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_adc.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_adc.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_adc.su -$(RM) ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_exti.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.su ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_adc.cyclo ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_adc.d ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_adc.o ./Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_adc.su
.PHONY: clean-Drivers-2f-STM32F4xx_HAL_Driver-2f-Src .PHONY: clean-Drivers-2f-STM32F4xx_HAL_Driver-2f-Src

2
Debug/objects.list
View File

@@ -1,3 +1,5 @@
"./Core/Src/dht11.o"
"./Core/Src/external-temperature.o"
"./Core/Src/external_temp.o" "./Core/Src/external_temp.o"
"./Core/Src/lcd.o" "./Core/Src/lcd.o"
"./Core/Src/main.o" "./Core/Src/main.o"

741
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h
View File

@@ -1,741 +0,0 @@
/**
******************************************************************************
* @file stm32f4xx_hal_i2c.h
* @author MCD Application Team
* @brief Header file of I2C HAL module.
******************************************************************************
* @attention
*
* Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_I2C_H
#define __STM32F4xx_HAL_I2C_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup I2C
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup I2C_Exported_Types I2C Exported Types
* @{
*/
/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition
* @brief I2C Configuration Structure definition
* @{
*/
typedef struct
{
uint32_t ClockSpeed; /*!< Specifies the clock frequency.
This parameter must be set to a value lower than 400kHz */
uint32_t DutyCycle; /*!< Specifies the I2C fast mode duty cycle.
This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */
uint32_t OwnAddress1; /*!< Specifies the first device own address.
This parameter can be a 7-bit or 10-bit address. */
uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
This parameter can be a value of @ref I2C_addressing_mode */
uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
This parameter can be a value of @ref I2C_dual_addressing_mode */
uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
This parameter can be a 7-bit address. */
uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
This parameter can be a value of @ref I2C_general_call_addressing_mode */
uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
This parameter can be a value of @ref I2C_nostretch_mode */
} I2C_InitTypeDef;
/**
* @}
*/
/** @defgroup HAL_state_structure_definition HAL state structure definition
* @brief HAL State structure definition
* @note HAL I2C State value coding follow below described bitmap :
* b7-b6 Error information
* 00 : No Error
* 01 : Abort (Abort user request on going)
* 10 : Timeout
* 11 : Error
* b5 Peripheral initialization status
* 0 : Reset (Peripheral not initialized)
* 1 : Init done (Peripheral initialized and ready to use. HAL I2C Init function called)
* b4 (not used)
* x : Should be set to 0
* b3
* 0 : Ready or Busy (No Listen mode ongoing)
* 1 : Listen (Peripheral in Address Listen Mode)
* b2 Intrinsic process state
* 0 : Ready
* 1 : Busy (Peripheral busy with some configuration or internal operations)
* b1 Rx state
* 0 : Ready (no Rx operation ongoing)
* 1 : Busy (Rx operation ongoing)
* b0 Tx state
* 0 : Ready (no Tx operation ongoing)
* 1 : Busy (Tx operation ongoing)
* @{
*/
typedef enum
{
HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */
HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */
HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */
HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */
HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission
process is ongoing */
HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception
process is ongoing */
HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */
HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */
HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */
} HAL_I2C_StateTypeDef;
/**
* @}
*/
/** @defgroup HAL_mode_structure_definition HAL mode structure definition
* @brief HAL Mode structure definition
* @note HAL I2C Mode value coding follow below described bitmap :\n
* b7 (not used)\n
* x : Should be set to 0\n
* b6\n
* 0 : None\n
* 1 : Memory (HAL I2C communication is in Memory Mode)\n
* b5\n
* 0 : None\n
* 1 : Slave (HAL I2C communication is in Slave Mode)\n
* b4\n
* 0 : None\n
* 1 : Master (HAL I2C communication is in Master Mode)\n
* b3-b2-b1-b0 (not used)\n
* xxxx : Should be set to 0000
* @{
*/
typedef enum
{
HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */
HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */
HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */
HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */
} HAL_I2C_ModeTypeDef;
/**
* @}
*/
/** @defgroup I2C_Error_Code_definition I2C Error Code definition
* @brief I2C Error Code definition
* @{
*/
#define HAL_I2C_ERROR_NONE 0x00000000U /*!< No error */
#define HAL_I2C_ERROR_BERR 0x00000001U /*!< BERR error */
#define HAL_I2C_ERROR_ARLO 0x00000002U /*!< ARLO error */
#define HAL_I2C_ERROR_AF 0x00000004U /*!< AF error */
#define HAL_I2C_ERROR_OVR 0x00000008U /*!< OVR error */
#define HAL_I2C_ERROR_DMA 0x00000010U /*!< DMA transfer error */
#define HAL_I2C_ERROR_TIMEOUT 0x00000020U /*!< Timeout Error */
#define HAL_I2C_ERROR_SIZE 0x00000040U /*!< Size Management error */
#define HAL_I2C_ERROR_DMA_PARAM 0x00000080U /*!< DMA Parameter Error */
#define HAL_I2C_WRONG_START 0x00000200U /*!< Wrong start Error */
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
#define HAL_I2C_ERROR_INVALID_CALLBACK 0x00000100U /*!< Invalid Callback error */
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
/**
* @}
*/
/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
* @brief I2C handle Structure definition
* @{
*/
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
typedef struct __I2C_HandleTypeDef
#else
typedef struct
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
{
I2C_TypeDef *Instance; /*!< I2C registers base address */
I2C_InitTypeDef Init; /*!< I2C communication parameters */
uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
uint16_t XferSize; /*!< I2C transfer size */
__IO uint16_t XferCount; /*!< I2C transfer counter */
__IO uint32_t XferOptions; /*!< I2C transfer options */
__IO uint32_t PreviousState; /*!< I2C communication Previous state and mode
context for internal usage */
DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
HAL_LockTypeDef Lock; /*!< I2C locking object */
__IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
__IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */
__IO uint32_t ErrorCode; /*!< I2C Error code */
__IO uint32_t Devaddress; /*!< I2C Target device address */
__IO uint32_t Memaddress; /*!< I2C Target memory address */
__IO uint32_t MemaddSize; /*!< I2C Target memory address size */
__IO uint32_t EventCount; /*!< I2C Event counter */
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Tx Transfer completed callback */
void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Rx Transfer completed callback */
void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Tx Transfer completed callback */
void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Rx Transfer completed callback */
void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Listen Complete callback */
void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Tx Transfer completed callback */
void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Rx Transfer completed callback */
void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Error callback */
void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Abort callback */
void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< I2C Slave Address Match callback */
void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp Init callback */
void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp DeInit callback */
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
} I2C_HandleTypeDef;
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
/**
* @brief HAL I2C Callback ID enumeration definition
*/
typedef enum
{
HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */
HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */
HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */
HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */
HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */
HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */
HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */
HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */
HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */
HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */
HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */
} HAL_I2C_CallbackIDTypeDef;
/**
* @brief HAL I2C Callback pointer definition
*/
typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); /*!< pointer to an I2C callback function */
typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
/**
* @}
*/
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup I2C_Exported_Constants I2C Exported Constants
* @{
*/
/** @defgroup I2C_duty_cycle_in_fast_mode I2C duty cycle in fast mode
* @{
*/
#define I2C_DUTYCYCLE_2 0x00000000U
#define I2C_DUTYCYCLE_16_9 I2C_CCR_DUTY
/**
* @}
*/
/** @defgroup I2C_addressing_mode I2C addressing mode
* @{
*/
#define I2C_ADDRESSINGMODE_7BIT 0x00004000U
#define I2C_ADDRESSINGMODE_10BIT (I2C_OAR1_ADDMODE | 0x00004000U)
/**
* @}
*/
/** @defgroup I2C_dual_addressing_mode I2C dual addressing mode
* @{
*/
#define I2C_DUALADDRESS_DISABLE 0x00000000U
#define I2C_DUALADDRESS_ENABLE I2C_OAR2_ENDUAL
/**
* @}
*/
/** @defgroup I2C_general_call_addressing_mode I2C general call addressing mode
* @{
*/
#define I2C_GENERALCALL_DISABLE 0x00000000U
#define I2C_GENERALCALL_ENABLE I2C_CR1_ENGC
/**
* @}
*/
/** @defgroup I2C_nostretch_mode I2C nostretch mode
* @{
*/
#define I2C_NOSTRETCH_DISABLE 0x00000000U
#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH
/**
* @}
*/
/** @defgroup I2C_Memory_Address_Size I2C Memory Address Size
* @{
*/
#define I2C_MEMADD_SIZE_8BIT 0x00000001U
#define I2C_MEMADD_SIZE_16BIT 0x00000010U
/**
* @}
*/
/** @defgroup I2C_XferDirection_definition I2C XferDirection definition
* @{
*/
#define I2C_DIRECTION_RECEIVE 0x00000000U
#define I2C_DIRECTION_TRANSMIT 0x00000001U
/**
* @}
*/
/** @defgroup I2C_XferOptions_definition I2C XferOptions definition
* @{
*/
#define I2C_FIRST_FRAME 0x00000001U
#define I2C_FIRST_AND_NEXT_FRAME 0x00000002U
#define I2C_NEXT_FRAME 0x00000004U
#define I2C_FIRST_AND_LAST_FRAME 0x00000008U
#define I2C_LAST_FRAME_NO_STOP 0x00000010U
#define I2C_LAST_FRAME 0x00000020U
/* List of XferOptions in usage of :
* 1- Restart condition in all use cases (direction change or not)
*/
#define I2C_OTHER_FRAME (0x00AA0000U)
#define I2C_OTHER_AND_LAST_FRAME (0xAA000000U)
/**
* @}
*/
/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
* @brief I2C Interrupt definition
* Elements values convention: 0xXXXXXXXX
* - XXXXXXXX : Interrupt control mask
* @{
*/
#define I2C_IT_BUF I2C_CR2_ITBUFEN
#define I2C_IT_EVT I2C_CR2_ITEVTEN
#define I2C_IT_ERR I2C_CR2_ITERREN
/**
* @}
*/
/** @defgroup I2C_Flag_definition I2C Flag definition
* @{
*/
#define I2C_FLAG_OVR 0x00010800U
#define I2C_FLAG_AF 0x00010400U
#define I2C_FLAG_ARLO 0x00010200U
#define I2C_FLAG_BERR 0x00010100U
#define I2C_FLAG_TXE 0x00010080U
#define I2C_FLAG_RXNE 0x00010040U
#define I2C_FLAG_STOPF 0x00010010U
#define I2C_FLAG_ADD10 0x00010008U
#define I2C_FLAG_BTF 0x00010004U
#define I2C_FLAG_ADDR 0x00010002U
#define I2C_FLAG_SB 0x00010001U
#define I2C_FLAG_DUALF 0x00100080U
#define I2C_FLAG_GENCALL 0x00100010U
#define I2C_FLAG_TRA 0x00100004U
#define I2C_FLAG_BUSY 0x00100002U
#define I2C_FLAG_MSL 0x00100001U
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup I2C_Exported_Macros I2C Exported Macros
* @{
*/
/** @brief Reset I2C handle state.
* @param __HANDLE__ specifies the I2C Handle.
* @retval None
*/
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \
(__HANDLE__)->State = HAL_I2C_STATE_RESET; \
(__HANDLE__)->MspInitCallback = NULL; \
(__HANDLE__)->MspDeInitCallback = NULL; \
} while(0)
#else
#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
#endif
/** @brief Enable or disable the specified I2C interrupts.
* @param __HANDLE__ specifies the I2C Handle.
* @param __INTERRUPT__ specifies the interrupt source to enable or disable.
* This parameter can be one of the following values:
* @arg I2C_IT_BUF: Buffer interrupt enable
* @arg I2C_IT_EVT: Event interrupt enable
* @arg I2C_IT_ERR: Error interrupt enable
* @retval None
*/
#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__))
#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
/** @brief Checks if the specified I2C interrupt source is enabled or disabled.
* @param __HANDLE__ specifies the I2C Handle.
* @param __INTERRUPT__ specifies the I2C interrupt source to check.
* This parameter can be one of the following values:
* @arg I2C_IT_BUF: Buffer interrupt enable
* @arg I2C_IT_EVT: Event interrupt enable
* @arg I2C_IT_ERR: Error interrupt enable
* @retval The new state of __INTERRUPT__ (TRUE or FALSE).
*/
#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
/** @brief Checks whether the specified I2C flag is set or not.
* @param __HANDLE__ specifies the I2C Handle.
* @param __FLAG__ specifies the flag to check.
* This parameter can be one of the following values:
* @arg I2C_FLAG_OVR: Overrun/Underrun flag
* @arg I2C_FLAG_AF: Acknowledge failure flag
* @arg I2C_FLAG_ARLO: Arbitration lost flag
* @arg I2C_FLAG_BERR: Bus error flag
* @arg I2C_FLAG_TXE: Data register empty flag
* @arg I2C_FLAG_RXNE: Data register not empty flag
* @arg I2C_FLAG_STOPF: Stop detection flag
* @arg I2C_FLAG_ADD10: 10-bit header sent flag
* @arg I2C_FLAG_BTF: Byte transfer finished flag
* @arg I2C_FLAG_ADDR: Address sent flag
* Address matched flag
* @arg I2C_FLAG_SB: Start bit flag
* @arg I2C_FLAG_DUALF: Dual flag
* @arg I2C_FLAG_GENCALL: General call header flag
* @arg I2C_FLAG_TRA: Transmitter/Receiver flag
* @arg I2C_FLAG_BUSY: Bus busy flag
* @arg I2C_FLAG_MSL: Master/Slave flag
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 16U)) == 0x01U) ? \
(((((__HANDLE__)->Instance->SR1) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) : \
(((((__HANDLE__)->Instance->SR2) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET))
/** @brief Clears the I2C pending flags which are cleared by writing 0 in a specific bit.
* @param __HANDLE__ specifies the I2C Handle.
* @param __FLAG__ specifies the flag to clear.
* This parameter can be any combination of the following values:
* @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode)
* @arg I2C_FLAG_AF: Acknowledge failure flag
* @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode)
* @arg I2C_FLAG_BERR: Bus error flag
* @retval None
*/
#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR1 = ~((__FLAG__) & I2C_FLAG_MASK))
/** @brief Clears the I2C ADDR pending flag.
* @param __HANDLE__ specifies the I2C Handle.
* This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
* @retval None
*/
#define __HAL_I2C_CLEAR_ADDRFLAG(__HANDLE__) \
do{ \
__IO uint32_t tmpreg = 0x00U; \
tmpreg = (__HANDLE__)->Instance->SR1; \
tmpreg = (__HANDLE__)->Instance->SR2; \
UNUSED(tmpreg); \
} while(0)
/** @brief Clears the I2C STOPF pending flag.
* @param __HANDLE__ specifies the I2C Handle.
* @retval None
*/
#define __HAL_I2C_CLEAR_STOPFLAG(__HANDLE__) \
do{ \
__IO uint32_t tmpreg = 0x00U; \
tmpreg = (__HANDLE__)->Instance->SR1; \
SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE); \
UNUSED(tmpreg); \
} while(0)
/** @brief Enable the specified I2C peripheral.
* @param __HANDLE__ specifies the I2C Handle.
* @retval None
*/
#define __HAL_I2C_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)
/** @brief Disable the specified I2C peripheral.
* @param __HANDLE__ specifies the I2C Handle.
* @retval None
*/
#define __HAL_I2C_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)
/**
* @}
*/
/* Include I2C HAL Extension module */
#include "stm32f4xx_hal_i2c_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup I2C_Exported_Functions
* @{
*/
/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
* @{
*/
/* Initialization and de-initialization functions******************************/
HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c);
void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
/* Callbacks Register/UnRegister functions ***********************************/
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID);
HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c);
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
/**
* @}
*/
/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions
* @{
*/
/* IO operation functions ****************************************************/
/******* Blocking mode: Polling */
HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
/******* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);
HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);
HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
/******* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
/**
* @}
*/
/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
* @{
*/
/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);
/**
* @}
*/
/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
* @{
*/
/* Peripheral State, Mode and Error functions *********************************/
HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c);
uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup I2C_Private_Constants I2C Private Constants
* @{
*/
#define I2C_FLAG_MASK 0x0000FFFFU
#define I2C_MIN_PCLK_FREQ_STANDARD 2000000U /*!< 2 MHz */
#define I2C_MIN_PCLK_FREQ_FAST 4000000U /*!< 4 MHz */
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup I2C_Private_Macros I2C Private Macros
* @{
*/
#define I2C_MIN_PCLK_FREQ(__PCLK__, __SPEED__) (((__SPEED__) <= 100000U) ? ((__PCLK__) < I2C_MIN_PCLK_FREQ_STANDARD) : ((__PCLK__) < I2C_MIN_PCLK_FREQ_FAST))
#define I2C_CCR_CALCULATION(__PCLK__, __SPEED__, __COEFF__) (((((__PCLK__) - 1U)/((__SPEED__) * (__COEFF__))) + 1U) & I2C_CCR_CCR)
#define I2C_FREQRANGE(__PCLK__) ((__PCLK__)/1000000U)
#define I2C_RISE_TIME(__FREQRANGE__, __SPEED__) (((__SPEED__) <= 100000U) ? ((__FREQRANGE__) + 1U) : ((((__FREQRANGE__) * 300U) / 1000U) + 1U))
#define I2C_SPEED_STANDARD(__PCLK__, __SPEED__) ((I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 2U) < 4U)? 4U:I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 2U))
#define I2C_SPEED_FAST(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__DUTYCYCLE__) == I2C_DUTYCYCLE_2)? I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 3U) : (I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 25U) | I2C_DUTYCYCLE_16_9))
#define I2C_SPEED(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__SPEED__) <= 100000U)? (I2C_SPEED_STANDARD((__PCLK__), (__SPEED__))) : \
((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__)) & I2C_CCR_CCR) == 0U)? 1U : \
((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__))) | I2C_CCR_FS))
#define I2C_7BIT_ADD_WRITE(__ADDRESS__) ((uint8_t)((__ADDRESS__) & (uint8_t)(~I2C_OAR1_ADD0)))
#define I2C_7BIT_ADD_READ(__ADDRESS__) ((uint8_t)((__ADDRESS__) | I2C_OAR1_ADD0))
#define I2C_10BIT_ADDRESS(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)0x00FF)))
#define I2C_10BIT_HEADER_WRITE(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)0x0300)) >> 7) | (uint16_t)0x00F0)))
#define I2C_10BIT_HEADER_READ(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)0x0300)) >> 7) | (uint16_t)(0x00F1))))
#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)0xFF00)) >> 8)))
#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)0x00FF)))
/** @defgroup I2C_IS_RTC_Definitions I2C Private macros to check input parameters
* @{
*/
#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DUTYCYCLE_2) || \
((CYCLE) == I2C_DUTYCYCLE_16_9))
#define IS_I2C_ADDRESSING_MODE(ADDRESS) (((ADDRESS) == I2C_ADDRESSINGMODE_7BIT) || \
((ADDRESS) == I2C_ADDRESSINGMODE_10BIT))
#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
((ADDRESS) == I2C_DUALADDRESS_ENABLE))
#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \
((CALL) == I2C_GENERALCALL_ENABLE))
#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
((STRETCH) == I2C_NOSTRETCH_ENABLE))
#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
((SIZE) == I2C_MEMADD_SIZE_16BIT))
#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) > 0U) && ((SPEED) <= 400000U))
#define IS_I2C_OWN_ADDRESS1(ADDRESS1) (((ADDRESS1) & 0xFFFFFC00U) == 0U)
#define IS_I2C_OWN_ADDRESS2(ADDRESS2) (((ADDRESS2) & 0xFFFFFF01U) == 0U)
#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \
((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \
((REQUEST) == I2C_NEXT_FRAME) || \
((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \
((REQUEST) == I2C_LAST_FRAME) || \
((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \
IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST))
#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \
((REQUEST) == I2C_OTHER_AND_LAST_FRAME))
#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET)
#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET)
/**
* @}
*/
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup I2C_Private_Functions I2C Private Functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_I2C_H */

115
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h
View File

@@ -1,115 +0,0 @@
/**
******************************************************************************
* @file stm32f4xx_hal_i2c_ex.h
* @author MCD Application Team
* @brief Header file of I2C HAL Extension module.
******************************************************************************
* @attention
*
* Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_I2C_EX_H
#define __STM32F4xx_HAL_I2C_EX_H
#ifdef __cplusplus
extern "C" {
#endif
#if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF)
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup I2CEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup I2CEx_Exported_Constants I2C Exported Constants
* @{
*/
/** @defgroup I2CEx_Analog_Filter I2C Analog Filter
* @{
*/
#define I2C_ANALOGFILTER_ENABLE 0x00000000U
#define I2C_ANALOGFILTER_DISABLE I2C_FLTR_ANOFF
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup I2CEx_Exported_Functions
* @{
*/
/** @addtogroup I2CEx_Exported_Functions_Group1
* @{
*/
/* Peripheral Control functions ************************************************/
HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup I2CEx_Private_Constants I2C Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup I2CEx_Private_Macros I2C Private Macros
* @{
*/
#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \
((FILTER) == I2C_ANALOGFILTER_DISABLE))
#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU)
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_I2C_EX_H */

1890
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_i2c.h
View File

File diff suppressed because it is too large Load Diff

7571
Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c
View File

File diff suppressed because it is too large Load Diff

182
Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c
View File

@@ -1,182 +0,0 @@
/**
******************************************************************************
* @file stm32f4xx_hal_i2c_ex.c
* @author MCD Application Team
* @brief I2C Extension HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of I2C extension peripheral:
* + Extension features functions
*
******************************************************************************
* @attention
*
* Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
@verbatim
==============================================================================
##### I2C peripheral extension features #####
==============================================================================
[..] Comparing to other previous devices, the I2C interface for STM32F427xx/437xx/
429xx/439xx devices contains the following additional features :
(+) Possibility to disable or enable Analog Noise Filter
(+) Use of a configured Digital Noise Filter
##### How to use this driver #####
==============================================================================
[..] This driver provides functions to configure Noise Filter
(#) Configure I2C Analog noise filter using the function HAL_I2C_AnalogFilter_Config()
(#) Configure I2C Digital noise filter using the function HAL_I2C_DigitalFilter_Config()
@endverbatim
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup I2CEx I2CEx
* @brief I2C HAL module driver
* @{
*/
#ifdef HAL_I2C_MODULE_ENABLED
#if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF)
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup I2CEx_Exported_Functions I2C Exported Functions
* @{
*/
/** @defgroup I2CEx_Exported_Functions_Group1 Extension features functions
* @brief Extension features functions
*
@verbatim
===============================================================================
##### Extension features functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Configure Noise Filters
@endverbatim
* @{
*/
/**
* @brief Configures I2C Analog noise filter.
* @param hi2c pointer to a I2C_HandleTypeDef structure that contains
* the configuration information for the specified I2Cx peripheral.
* @param AnalogFilter new state of the Analog filter.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter)
{
/* Check the parameters */
assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter));
if (hi2c->State == HAL_I2C_STATE_READY)
{
hi2c->State = HAL_I2C_STATE_BUSY;
/* Disable the selected I2C peripheral */
__HAL_I2C_DISABLE(hi2c);
/* Reset I2Cx ANOFF bit */
hi2c->Instance->FLTR &= ~(I2C_FLTR_ANOFF);
/* Disable the analog filter */
hi2c->Instance->FLTR |= AnalogFilter;
__HAL_I2C_ENABLE(hi2c);
hi2c->State = HAL_I2C_STATE_READY;
return HAL_OK;
}
else
{
return HAL_BUSY;
}
}
/**
* @brief Configures I2C Digital noise filter.
* @param hi2c pointer to a I2C_HandleTypeDef structure that contains
* the configuration information for the specified I2Cx peripheral.
* @param DigitalFilter Coefficient of digital noise filter between 0x00 and 0x0F.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter)
{
uint16_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter));
if (hi2c->State == HAL_I2C_STATE_READY)
{
hi2c->State = HAL_I2C_STATE_BUSY;
/* Disable the selected I2C peripheral */
__HAL_I2C_DISABLE(hi2c);
/* Get the old register value */
tmpreg = hi2c->Instance->FLTR;
/* Reset I2Cx DNF bit [3:0] */
tmpreg &= ~(I2C_FLTR_DNF);
/* Set I2Cx DNF coefficient */
tmpreg |= DigitalFilter;
/* Store the new register value */
hi2c->Instance->FLTR = tmpreg;
__HAL_I2C_ENABLE(hi2c);
hi2c->State = HAL_I2C_STATE_READY;
return HAL_OK;
}
else
{
return HAL_BUSY;
}
}
/**
* @}
*/
/**
* @}
*/
#endif
#endif /* HAL_I2C_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/

54
test1.ioc
View File

@@ -16,36 +16,28 @@ KeepUserPlacement=false
Mcu.CPN=STM32F407VGT6 Mcu.CPN=STM32F407VGT6
Mcu.Family=STM32F4 Mcu.Family=STM32F4
Mcu.IP0=ADC1 Mcu.IP0=ADC1
Mcu.IP1=I2C1 Mcu.IP1=NVIC
Mcu.IP2=NVIC Mcu.IP2=RCC
Mcu.IP3=RCC Mcu.IP3=SYS
Mcu.IP4=SYS Mcu.IPNb=4
Mcu.IPNb=5
Mcu.Name=STM32F407V(E-G)Tx Mcu.Name=STM32F407V(E-G)Tx
Mcu.Package=LQFP100 Mcu.Package=LQFP100
Mcu.Pin0=PA0-WKUP Mcu.Pin0=PA0-WKUP
Mcu.Pin1=PB1 Mcu.Pin1=PB1
Mcu.Pin10=PD13 Mcu.Pin10=PD12
Mcu.Pin11=PD14 Mcu.Pin11=PD13
Mcu.Pin12=PD15 Mcu.Pin12=PD14
Mcu.Pin13=PC6 Mcu.Pin13=PD15
Mcu.Pin14=PC8 Mcu.Pin14=VP_SYS_VS_Systick
Mcu.Pin15=PC9
Mcu.Pin16=PA15
Mcu.Pin17=PC11
Mcu.Pin18=PB6
Mcu.Pin19=PB7
Mcu.Pin2=PE7 Mcu.Pin2=PE7
Mcu.Pin20=PB9
Mcu.Pin21=VP_SYS_VS_Systick
Mcu.Pin3=PE10 Mcu.Pin3=PE10
Mcu.Pin4=PE11 Mcu.Pin4=PE11
Mcu.Pin5=PE12 Mcu.Pin5=PE12
Mcu.Pin6=PE13 Mcu.Pin6=PE13
Mcu.Pin7=PE14 Mcu.Pin7=PE14
Mcu.Pin8=PE15 Mcu.Pin8=PE15
Mcu.Pin9=PD12 Mcu.Pin9=PD11
Mcu.PinsNb=22 Mcu.PinsNb=15
Mcu.ThirdPartyNb=0 Mcu.ThirdPartyNb=0
Mcu.UserConstants= Mcu.UserConstants=
Mcu.UserName=STM32F407VGTx Mcu.UserName=STM32F407VGTx
@@ -53,6 +45,7 @@ MxCube.Version=6.12.1
MxDb.Version=DB.6.0.121 MxDb.Version=DB.6.0.121
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.EXTI0_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
NVIC.ForceEnableDMAVector=true NVIC.ForceEnableDMAVector=true
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
@@ -63,26 +56,11 @@ NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:false NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:false
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
PA0-WKUP.Locked=true PA0-WKUP.Locked=true
PA0-WKUP.Signal=GPIO_Input PA0-WKUP.Signal=GPXTI0
PA15.Locked=true
PA15.Signal=GPIO_Input
PB1.Locked=true PB1.Locked=true
PB1.Signal=ADCx_IN9 PB1.Signal=ADCx_IN9
PB6.Mode=I2C PD11.Locked=true
PB6.Signal=I2C1_SCL PD11.Signal=GPIO_Output
PB7.Locked=true
PB7.Signal=GPIO_Output
PB9.Locked=true
PB9.Mode=I2C
PB9.Signal=I2C1_SDA
PC11.Locked=true
PC11.Signal=GPIO_Input
PC6.Locked=true
PC6.Signal=GPIO_Input
PC8.Locked=true
PC8.Signal=GPIO_Input
PC9.Locked=true
PC9.Signal=GPIO_Input
PD12.Locked=true PD12.Locked=true
PD12.Signal=GPIO_Output PD12.Signal=GPIO_Output
PD13.Locked=true PD13.Locked=true
@@ -165,6 +143,8 @@ RCC.VCOOutputFreq_Value=192000000
RCC.VcooutputI2S=96000000 RCC.VcooutputI2S=96000000
SH.ADCx_IN9.0=ADC1_IN9,IN9 SH.ADCx_IN9.0=ADC1_IN9,IN9
SH.ADCx_IN9.ConfNb=1 SH.ADCx_IN9.ConfNb=1
SH.GPXTI0.0=GPIO_EXTI0
SH.GPXTI0.ConfNb=1
VP_SYS_VS_Systick.Mode=SysTick VP_SYS_VS_Systick.Mode=SysTick
VP_SYS_VS_Systick.Signal=SYS_VS_Systick VP_SYS_VS_Systick.Signal=SYS_VS_Systick
board=custom board=custom