add SST25VF016B Flash testing function

Core/Src/main.c

@@ -28,6 +28,7 @@
 #include "PCA9685.h"
 #include "24AA02E48.h"
 #include "CS43L22.h"
+#include "SST25VF016B.h"
 
 /* USER CODE END Includes */
 
@@ -54,6 +55,8 @@ ADC_HandleTypeDef hadc1;
 
 I2C_HandleTypeDef hi2c1;
 
+SPI_HandleTypeDef hspi1;
+
 /* USER CODE BEGIN PV */
 
 void ((*executors[])(void)) = {
@@ -61,7 +64,8 @@ void ((*executors[])(void)) = {
 		DNI_show_fahrenheit,
 		PCA9685_run_test,
 		EEPROM_24AA02E48_run_test,
-		CS43L22_run_test
+		CS43L22_run_test,
+		SST25VF016B_run_test
 };
 
 void ((*cleanup_functions[])(void)) = {
@@ -69,10 +73,11 @@ void ((*cleanup_functions[])(void)) = {
 		NULL,
 		PCA9685_cleanup,
 		NULL,
-		CS43L22_cleanup
+		CS43L22_cleanup,
+		NULL
 };
 
-int delay_between_runs[] = {250, 250, -1, -1, -1};
+int delay_between_runs[] = {250, 250, -1, -1, -1, -1};
 
 size_t current_executor_id = 0;
 
@@ -85,6 +90,7 @@ void SystemClock_Config(void);
 static void MX_GPIO_Init(void);
 static void MX_ADC1_Init(void);
 static void MX_I2C1_Init(void);
+static void MX_SPI1_Init(void);
 /* USER CODE BEGIN PFP */
 
 /* USER CODE END PFP */
@@ -95,7 +101,7 @@ static void MX_I2C1_Init(void);
 void switch_to_next_test(void)
 {
 	current_executor_id += 1;
-	current_executor_id %= 5;
+	current_executor_id %= 6;
 }
 
 void buttons_switch_to_interrupt(void)
@@ -251,6 +257,7 @@ int main(void)
   MX_GPIO_Init();
   MX_ADC1_Init();
   MX_I2C1_Init();
+  MX_SPI1_Init();
   /* USER CODE BEGIN 2 */
   buttons_interrupt_enabled = 0;
 
@@ -423,6 +430,44 @@ static void MX_I2C1_Init(void)
 
 }
 
+/**
+  * @brief SPI1 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_SPI1_Init(void)
+{
+
+  /* USER CODE BEGIN SPI1_Init 0 */
+
+  /* USER CODE END SPI1_Init 0 */
+
+  /* USER CODE BEGIN SPI1_Init 1 */
+
+  /* USER CODE END SPI1_Init 1 */
+  /* SPI1 parameter configuration*/
+  hspi1.Instance = SPI1;
+  hspi1.Init.Mode = SPI_MODE_MASTER;
+  hspi1.Init.Direction = SPI_DIRECTION_2LINES;
+  hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
+  hspi1.Init.CLKPolarity = SPI_POLARITY_LOW;
+  hspi1.Init.CLKPhase = SPI_PHASE_1EDGE;
+  hspi1.Init.NSS = SPI_NSS_SOFT;
+  hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16;
+  hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
+  hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
+  hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+  hspi1.Init.CRCPolynomial = 10;
+  if (HAL_SPI_Init(&hspi1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN SPI1_Init 2 */
+
+  /* USER CODE END SPI1_Init 2 */
+
+}
+
 /**
   * @brief GPIO Initialization Function
   * @param None
@@ -447,7 +492,7 @@ static void MX_GPIO_Init(void)
 
   /*Configure GPIO pin Output Level */
   HAL_GPIO_WritePin(GPIOD, GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15
-                          |GPIO_PIN_4, GPIO_PIN_RESET);
+                          |GPIO_PIN_4|GPIO_PIN_7, GPIO_PIN_RESET);
 
   /*Configure GPIO pin Output Level */
   HAL_GPIO_WritePin(GPIOB, GPIO_PIN_7, GPIO_PIN_RESET);
@@ -468,9 +513,9 @@ static void MX_GPIO_Init(void)
   HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
 
   /*Configure GPIO pins : PD12 PD13 PD14 PD15
-                           PD4 */
+                           PD4 PD7 */
   GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15
-                          |GPIO_PIN_4;
+                          |GPIO_PIN_4|GPIO_PIN_7;
   GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
   GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;