44 lines
2.1 KiB
Plaintext
44 lines
2.1 KiB
Plaintext
|
┌───────────────────╖
|
||
|
|
│ 1.CONSTANT FIELD. ║
|
||
|
|
╘═══════════════════╝
|
||
|
|
Includes:
|
||
|
|
D - constant;
|
||
|
|
OED - allow issue of the constant.
|
||
|
|
|
||
|
|
|
||
|
|
┌─────────╖
|
||
|
|
│ Field D ║ CONSTANT.
|
||
|
|
╘═════════╝ ────────┘
|
||
|
|
Purpose.
|
||
|
|
1) Lowest 12 digits are used to shape the addresses
|
||
|
|
transition worked out from MCU. The given digits
|
||
|
|
constantly enter on bus of the branching address if in
|
||
|
|
result of performing the command in MCU (chip BY4) is
|
||
|
|
formed a signal PE=0;
|
||
|
|
2) All 16 digits can be used to assign the constants,
|
||
|
|
which under signal OED=0 control can be issued on
|
||
|
|
system data bus. This particularity allows:
|
||
|
|
|
||
|
|
- first, reduce digits of ROM MI(the microinstructions)
|
||
|
|
to account of the joining by flap;
|
||
|
|
- secondly, enables to load the necessary constants,
|
||
|
|
masks etc. in any device, connected to system data bus.
|
||
|
|
|
||
|
|
The note. Values are entered in hex code.
|
||
|
|
After entering the new command zero constant became assign.
|
||
|
|
|
||
|
|
┌────────╖
|
||
|
|
│ OED ║ ALLOW THE ISSUE OF THE CONSTANT ON ADDRESS BUS.
|
||
|
|
╘════════╝ ─────────────────────────────────────────────────────┘
|
||
|
|
Purpose.
|
||
|
|
The Permit of the issue all sixteen digits of the
|
||
|
|
field D on system data bus. Setting of given signal in
|
||
|
|
zero condition forms on system data bus condition of
|
||
|
|
constants of the field D. .
|
||
|
|
Level : 0 - Active (the issue resolved);
|
||
|
|
1 - Passive (the issue prohibited).
|
||
|
|
The note.
|
||
|
|
Values are entered in binary code(value 0 or 1).
|
||
|
|
After entering the new command issue constants from
|
||
|
|
MIM on data bus is prohibited.
|